-
KM Ford Ranger Raptor DPF back exhaust This is the ultimate exhaust system for the ultimate truck! Ford knocked it out of the ball park with this truck so with a large amount of real life R&D in our workshop we have released our full 304 stainless steel 3.5 inch DPF back exhaust system for the mighty Ford Ranger Raptor. -
The KM Straight Ace 3 inch steel exhaust system is specifically designed for HQ/ HJ/ HX/ HZ Holden sedans. This is a multi fit bolt on exhaust system to suit all V8's and including engine swaps. The KM straight Ace system is extractors back, it includes adaptors to suit the extractors on your car. The system is made up of a "X" pipe, 2 KM 409 mufflers and under diff tailpipes. It is designed to be fitted in your shed or by your local mechanic. -
N80 Toyota Hilux exhaust, DPF back 304 stainless steel system made in Australia. Due to popular demand, we have designed an exhaust system based on the prototypes seen on the KM YouTube channel. With a large amount of real-life R&D in our workshop we have released our full 304 stainless steel 3.5-inch DPF back exhaust system for the Hilux DPF Model. This exhaust system is handmade, from the finest New Zealand-made 304 stainless steel. It is a direct bolt up to the DPF and has a slip joint for maximum seal and longevity. This exhaust will outlast all of us. We have tested this system on numerous vehicles before releasing it and we have put together the perfect setup for aesthetics, longevity, power gains and most importantly giving the maximum potential turbo diesel note from a DPF vehicle. -
Nissan Navara Np300 Exhaust. 3.5-inch DPF back exhaust for the D23 Navara This is a 3.5-inch Stainless steel system that bolts directly to the DPF and replaces the standard exhaust. This is a half-length exhaust that finishes at the diff. -
The KM Ram 1500 sports muffler duel exhaust assembly replaces the factory muffler on the twin exhaust system. It is quick and easy to fit with just 3 bolts! However, Once fitted it gives the very cool Ram; a very cool Rumble. -
The KM Ford RANGER PX3 Exhaust DPF back 304 stainless steel system is hand-made in Australia. KM Ford Ranger PX3 DPF back exhaust Due to popular demand we have designed an exhaust system based on the Ranger Raptor. With a large amount of real-life R&D in our workshop; we have released our full 304 stainless steel 3.5-inch DPF back exhaust system for the PX3 Ford Ranger DPF Model. This exhaust system is hand-made, TIG welded from the finest New Zealand-made 304 stainless steel. It is a direct bolt up to the DPF and has a slip joint for maximum seal and longevity. This exhaust will outlast all of us. We have tested this system on numerous Rangers before releasing it and we have put together the perfect setup for aesthetics, longevity, power gains and most importantly giving a tuff turbo diesel note to your truck. -
The KM Y62 Nissan Patrol mid-assembly with cat delete pipes This replaces the exhaust system from the manifold cat convertors to the starting flange of the tail pipe. It contains the secondary cat pipes and mid sports muffler assembly. -
* Due to high demand and pre-existing waitlist, these systems have a two-week turnaround from the initial order date * This is a 3.5" 304 Stainless Steel Muffler Delete for the 2021 Chevrolet Silverado 1500. It is quick and easy to fit. 2 cuts are required to remove the stock muffler. The KM Sports Muffler Delete pipe is expanded on each end to slide over the cut pipes. Once in place simply tension the claps and it is ready to go. -
The KM DT RAM 1500 sports muffler assembly replaces the factory muffler on the exhaust system. It is quick and easy to fit, with just 3 bolts! Once fitted it gives the very cool Ram; a very cool Rumble. -
Nissan Navara Np300 Exhaust . 3-inch DPF back exhaust for the D23 Navara
This is a 3-inch 409 Stainless Steel system that bolts directly to the DPF and replaces the standard exhaust.
This is a half-length exhaust that finishes at the diff.
NOTE- does not fit the new 2021 model.
-
This is the 3.5-inch, 304 Stainless Steel, KM DPF back exhaust for the Mitsubishi MR Triton.
This is a high-quality stainless steel system that is a direct replacement for the standard factory exhaust.
This system is hand-made in-house by KM- Kuluin Mufflers. We are located on the Sunshine Coast Qld and specialize in Custom Exhaust Fabrication. All of our products are Australian-made and created from the highest quality locally sourced components.
The MQ and MR Triton system is the same design
KM EXHAUSTS
KM EXHAUSTS AUSTRALIA
Unit 4/2B Robert St, Kunda Park
QLD 4556 Australia
Phone:
(07) 5445 2576
exhausts@kuluinmufflers.com.au
AUTHORISED DEALER FOR:
FOLLOW US
© Copyright 2024 | All Rights Reserved Kuluin Mufflers & Kuluin Exhausts